Pack of 2/Pack of Water-based Tapaporos
55,66€
Prepares, protects and achieves perfect finishes on porous surfaces with a professional quality filler.
| Drying Time |
<= 1 hour |
|---|---|
| Painting Time |
<= 4-5 hours |
| Performance |
8-12 m²/L |
| To water |
Water-based, NON-toxic |
| Low VOC |
Indicates low levels of volatile organic compounds. |
Pack of 2 cans of 4 litres of Tapaporos Varnish
Prepare furniture and porous surfaces with the water-based Tapaporos 2-Pack/Cans to achieve a final finish with another varnish or wax.
It is used to protect and prepare furniture and other porous surfaces before applying another varnish or wax finish.
- Covers the pore of the wood and facilitates the final finish.
- High filling power.
- Excellent sandability.
- Odourless.
- 4 Litre format.
Features
- Colourless interior varnish.
- Easy application.
- Quick drying.
- It can be applied by brush, spray or roller.
- High performance.
- Water-based, NON-toxic.
- Sold in packs of 2 cans of 4L of Varnish Tapaporos each.
- Total: 8 Litres.
- CHEMICAL PRODUCT IS NON-RETURNABLE
Instructions for use
How to work with the Pack of 2 x 4 litre pots of Tapaporos Varnish.
The wood must be clean, dry and free of varnish or wax residues. It is advisable not to apply at temperatures below 5ºC or above 35ºC. The relative humidity must not exceed approx. 70%.
Stir the contents of the container for perfect homogenisation. Apply a first coat of Tapaporos and leave to dry for 2-3 hours. Sand with a fine sanding block, remove the dust produced and apply a second coat. For very porous woods it may be necessary to apply a third coat, always sanding between coats. Then apply the finishing varnish.
Can be used by brush, roller or spray.
It is recommended to do a test by first applying a small amount on an inconspicuous area to check the compatibility of the product with the surface to be treated.
The properties of this product may vary depending on the type of wood to be treated, the application method or the exposure conditions.
Store the container in suitable conditions away from frost, high temperatures and direct sunlight.
You must be logged in to post a review.
We manage your orders and queue them immediately for preparation and delivery. There are various preparation times due to the fact that certain products are made to order. On each product page we indicate the estimated delivery times either in writing and/or with icons described in the transport section of the how to buy guide.
The packaging and packing of each product has been carefully designed to be protected and with indications for handling and transport.
Transport and Deliveries
All orders have the default instruction on the delivery note to notify the recipient 1 day before delivery. You should therefore indicate your address and contact details as explicitly as possible in order to facilitate and coordinate the receipt of your order.
Deliveries are made at street level. We suggest that you make arrangements to receive them, especially if the order is of considerable volume and weight.
Many of the products in our catalogue are presented in formats, dimensions and measures that are NOT standard in terms of palletisation. That is to say, the shipment is not made by standard parcel vans; the shipments are made by transport agencies that have the structure to handle different types and sizes of materials as well as with vehicles of sizes classified as N2. We suggest you read the transport section of our how to buy guide before placing your order.
Reviews
There are no reviews yet.