Pack of 2/Pack Colourless Water-Based Satin Varnish

Features

• IndoorThis varnish is specially designed for indoor use, providing long-lasting protection and an elegant finish to furniture and wooden surfaces in the home.
• High hardnessOffers high resistance to wear, scratches and stains, ensuring that your furniture maintains its appearance and quality for a long time.
• Water-based, non-toxicFormulated with a water base, this varnish is safer for the environment and your health, as it emits fewer volatile organic compounds (VOCs) and contains no toxic substances.
• Suitable for giving a matt finish to all types of wood.Provides a matt finish that enhances the natural beauty of the wood, giving an elegant and sophisticated touch to any surface.
• Can be applied with a roller, brush or spray gunApplication is simple and versatile, allowing the use of roller, brush or spray for uniform and efficient coverage.
• Sold in packs of 2 cans of 4L of Varnish Tapaporos each.
• Total: 8 Litres.
• CHEMICAL PRODUCT IS NON-RETURNABLE

Instructions for use

How to work with the 2-pack of Water-Based Colourless Satin Varnish

Remove the contents of the container and wait for one or two minutes. Make sure the surface is clean, dry and free of varnish or wax residues. It is recommended to apply the product at a temperature between 5ºC and 35ºC, with a humidity lower than 70%. It can be applied by brush, spray or roller.

For new wood: Apply one or two coats of Water-Based Primer, depending on the porosity of the wood, sanding each coat with a fine sanding block. Then apply one or two coats of Water-Based Colourless Satin Varnish. You can also apply the Satin Varnish directly as an undercoat and topcoat.

For varnished wood: If the varnish is well adhered, sand lightly and apply the product. If the varnish is cracked or poorly adhered, remove it by sanding or stripping down to the wood. Remove dust and treat the wood as if it were new.

It is recommended to do a test by first applying a small amount on an inconspicuous area to check the compatibility of the product with the surface to be treated.

The properties of this product may vary depending on the type of wood, method of application or exposure conditions.

Store the container in suitable conditions, protecting it from frost, high temperatures or direct sunlight.