75,02€
Protect and give a long-lasting finish to your indoor furniture with a highly resistant polyurethane satin varnish.
| Drying Time |
=< 1'30 hour |
|---|---|
| Painting Time |
=< 6 hours |
| Performance |
10-14 m²/L |
| To water |
Water-based, NON-toxic |
| Low VOC |
Indicates low levels of volatile organic compounds. |
One-component polyurethane varnish is an advanced solution specifically designed to prime and provide a final finish to interior furniture.
This type of varnish is distinguished by its ability to offer a higher hardness compared to conventional varnishes.
It is ideal for those projects that demand greater strength and durability, ensuring that the furniture maintains its appearance and quality over an extended period of time.
Its single-component formulation makes it easy to apply, as no additional mixing is required, making it a practical and efficient choice for professionals and DIY enthusiasts alike.
How to work with the Pack of 2 x 4 litre pots of Satin Polyurethane Varnish.
Remove the contents of the container and wait for one or two minutes. Make sure the surface is clean, dry and free of varnish or wax residues.
It is recommended to apply the product at a temperature between 5ºC and 35ºC, with a humidity lower than 70%. It can be applied by brush, spray or roller.
For new woodApply one or two coats of Water-Based Primer, depending on the porosity of the wood, sanding each coat lightly with a fine sanding block. Then apply one or two coats of Water-Based Colourless Satin Varnish. Alternatively, you can apply the Satin Varnish directly as an undercoat and topcoat.
For varnished woodIf the varnish is well adhered, sand lightly and apply the product. If the varnish is cracked or badly adhered, remove it by sanding or stripping down to the wood. Remove dust and treat the wood as if it were new.
It is recommended to test by applying a small amount on an inconspicuous area to check the compatibility of the product with the surface to be treated.
The properties of this product may vary depending on the type of wood, method of application and exposure conditions.
You must be logged in to post a review.
We manage your orders and queue them immediately for preparation and delivery. There are various preparation times due to the fact that certain products are made to order. On each product page we indicate the estimated delivery times either in writing and/or with icons described in the transport section of the how to buy guide.
The packaging and packing of each product has been carefully designed to be protected and with indications for handling and transport.
All orders have the default instruction on the delivery note to notify the recipient 1 day before delivery. You should therefore indicate your address and contact details as explicitly as possible in order to facilitate and coordinate the receipt of your order.
Deliveries are made at street level. We suggest that you make arrangements to receive them, especially if the order is of considerable volume and weight.
Many of the products we have in our catalogue are presented in formats, dimensions and measures that are NOT standard in terms of palletisation. That is to say, the shipment is not made by standard parcel vans; shipments are made by transport agencies that have the structure to handle various types and sizes of materials as well as vehicles of sizes classified as N2. We suggest you read the transport section of our how to buy guide before placing your order.
Reviews
There are no reviews yet.